● Rounded Frame with Transparent Panels
The curved frame outline, black exterior, and red inner detailing give the BLS-HS339 a recognizable appearance. Transparent side panels maintain sightlines across the entrance, while the swing barriers define each controlled passage.
● Controlled Motorized Movement
The motor-driven mechanism opens and closes the swing barriers after receiving an authorization signal. Movement settings are configured to suit the selected drive system, barrier size, and operating requirements.
● Infrared Passage Monitoring
Infrared sensors monitor movement through the lane and support detection of tailgating, reverse entry, and unauthorized passage. Alarm responses depend on the selected controller and operating settings.
● Obstacle Detection
Passage sensors work with the gate controller to help prevent barrier closure while an obstruction is detected in the monitored area. Correct sensor alignment and commissioning are essential for reliable operation.
● Automatic Passage Reset
If an authorized user does not enter within the configured time, the gate cancels the unused passage authorization and returns to its standby state. Passage timing can be adjusted for the application.
●Clear Direction Indicators
Front-facing LED arrows help users identify the permitted direction of travel. Reader positions on the upper surface provide a convenient location for credential presentation.
●Emergency Release Integration
An emergency input can be connected to the building’s fire alarm system to request gate release. Power-failure behavior and any backup power requirements are specified with the selected configuration.
● Access Control Integration
The BLS-HS339 can operate with compatible third-party access control equipment. The connected system verifies the credential and sends the gate an opening command; user permissions and access records are managed by that system.
Features
● Modular design and plug and play for easy installation and integration
● Low power consumption and easy setup, fresh friendly
● Continuously recognize to improve peak time passage frenquency.
● Automatic self-inspect when powered-on to ensure stable and reliable operation.
● Sound and light warnings for abnormal access and equipment faults, easy for management and maintenance
● Clear voice and audio remind for easy and orderly passage.
● Modern curved structure design, ideal for high-end commercial building and headquater office entrance
● Seamlessly integrates with most of access control systems on the market.
Technical Specifications
| Parameters | Specification |
| Material | Frame: carbon steel/201 stainless steel/304stainless steel+power coating colors |
| Swing barriers: 10mm thickness Acrylic, tempered glass,PVC or stainless steel | |
| Dimensions | Main body:1500mm(length)*120mm(width)*980mm(height) Swing barriers: 280mm-450mm width |
| Passage Width | Standard: 600-900mm customized, some special models can be wider, single lane and multi-lanes optional |
| Speed Performance | 30-40 people/min; Barrier opening time: 0.2-0.5s after authorization (much faster than swing turnstiles), bi-directional |
| Power Supply | AC 100-240V (universal voltage); |
| Control voltage: DC 24V | |
| Motor Parameters | Brushless DC motor; Power: 40-60W; Rotational speed: 3000rpm (stable and low-noise operation) |
| Servo motor, Power: 60-100W; Rotational speed: 3000rpm (stable and low-noise operation) | |
| Interface | Input:relay signal; output: dry contact RS232, RS485, TCP/IP |
| Emergency Control | External emergency-release input,like fire alarm, automatic open of need to push light when powered off, also can add emergency button |
| Passage monitoring | Infrared sensor system |
| Environmental Resistance | IP54/IP65 rating; |
| Operating temp: -25℃ to 65℃; |
Structure and Dimensions
The BLS-HS339 combines a rounded outer frame, transparent side infill panels, motorized swing barriers, and integrated direction indicators. The drive mechanism, control electronics, power supply, and sensor system work together to manage passage through each lane.
The product image shows a two-lane arrangement formed by three cabinets. In a multi-lane installation, intermediate cabinets serve the adjacent lanes, allowing the entrance layout to be planned around available space and pedestrian flow.
For project planning, request a dimension drawing showing cabinet size, clear passage width, fixing positions, and cable entry points. Accessible passage requirements should be included when the layout is prepared.
Installation dimensions must follow the approved BLS-HS339 drawing rather than measurements taken from product images.
Customization & Accessories
BOLAN offers OEM and ODM support for the BLS-HS339. Depending on the project, customization can include:
Frame colors and surface finishes
Logo placement on cabinets or barrier panels
Reader openings and terminal mounting arrangements
Passage width and lane layout
Barrier panel material and dimensions
Direction indicators and optional audible alerts
Custom requests are reviewed against the gate structure, drive capacity, and installation conditions before production.
RFID card or wristband readers
QR code scanners for visitor passes or tickets
Facial recognition terminals
Fingerprint readers
Exit buttons
Remote controls
Operating & Control
The gate can be configured for:
Authorized entry and authorized exit
Authorized entry with free exit
Controlled passage in one direction
Free-passage or closed-access operation, where supported by the selected controller
Access permissions are handled by the connected access control system. Emergency-release commands take priority according to the agreed control logic.
Application Scenes
PDF Document Download
Contact BOLAN to request the BLS-HS339 technical datasheet, dimension drawing, and configuration details for your project.
Send us your entrance dimensions, lane requirements, and preferred access method. We will help you select the configuration and prepare a quotation.